It is used for serial and high quality welding of workpieces with large volumes and many center points.

• Servo-motor is movable in all axes.
• Its idle speed is 60 m/min. is. It can also be produced at higher speeds.
• There is a welding point on the X and Y axis, welding is performed on the Z1 and Z2 axis.
• It is possible to weld on different planes with the servo-motor movement of the lower (Z1) and upper (Z2) electrodes.
• The penetration depth of the electrodes into the workpiece can be adjusted.
• The way it works can be easily programmed with the CAM method and/or the teaching-mode.
• The welding transformer is medium frequency (MF).
• A welding program unit with 99 programs and constant current character is used.
• The capacity can be increased by adding a sliding fixture or a rotary table to the front of the machine.